solutiontreatment相关论文
采用差示扫描量热仪(DSC)、光学显微镜(OM)、扫描电子显微镜(SEM)、X射线衍射仪(XRD)和拉伸试验机研究了固溶温度和时间对挤压态Al......
采用显微组织观察、EDS分析、失重实验和电化学测试研究了固溶和固溶-时效WE43合金的腐蚀性能.结果 表明,通过热处理改变基体中第......
The effect of solution treatment on the microstructure and creep properties of forged TiAl–Nb alloys was inves-tigated.......
Effect of Solution Treatment on the Microstructure and Mechanical Properties of Sand-Cast Mg-9Gd-4Y-
Sand-cast Mg-9Gd-4Y-0.5Zr (wt％) alloy was solution-treated at 500-565 ℃ in the time range of 0.5-30 h in air or vacuum t......
Effect of Solution Treatment on Microstructure and Corrosion Properties of Mg-4Gd-1Y-1Zn-0.5Ca-1Zr A
The as-cast multi-element Mg-4Gd-1Y-1Zn-0.5Ca-1Zr alloy with low rare earth additions was prepared,and the solution trea......
Influence of heat treatment on microstructure and mechanical properties of Al/Al-Cu graded materials
...
Effect of Solution Treatment on Structure and Mechanical Properties of Fe-Mn-Al-Si Light Steel After
The solution treatment of three different components of Fe-Mn-Al-Si light steel after cold rolling are carried out at 10......
The effect of different solution treatment processes on the microstructure,mechanical properties and corrosion resistanc......
Microstructure and surface of 2A12 aluminum alloy cladded with pure aluminum after solution treatmen
The effects of solution temperature and holding time on the microstructure,mechanical properties and surface morphology ......
研究了 Mg-0.5Zr-1.8Zn-xGd(x=0,0.5,1.0,1.5,2.0,2.5,质量分数,％)镁合金经过470℃和10 h固溶处理后的组织、力学性能和耐腐蚀性能.......
利用相图和金相分析确定了ＺＬ１０７Ａ合金铸态的相组成为：ａ（Ａｌ）、Ｓｉ、Ｍｇ２Ｓｉ、Ａｌ２Ｃｕ、Ｗ、ＴｉＡｌ３、ＡｌＢ２和ＴｉＢ２。根据凝固过程所涉及的５个共晶反应和不同加热制度的试验研究确定......
